 |
Why regrinding punch and die?
Auto Punch Die grinder is designed to sharpen punch and die for punch press tooling efficiently and easily.Keep punch die sharpening.
1.Improve holes quality
2.Reduce burrs on sheet
3.Extend tooling and machine life
4.Keep punching quiet
What tooling can sharpen?
AFAB punch die grinder sharpen all type tooling for Trumpf Trumatic,Trumpf Trupunch, Boschert, Haco, Pullmax , Amada, Finn-Power,Prima-Power, Durma, Schiavi, LVD, Strippit, Danobat, Yawei, Nisshinbo,Euromac, Baykal, FIM, Murata Muratec, Rainer, MVD, Tailift, SimasV,Yangli, Peliant, SNK, Ermarksam,AMC, Hesse-aschinen, Ermaksan, Dener,ITEK
Auto Tooling Grinder Advantage
1.Fully auto grinder,Automatical action for Detecting tooling surface,Grinding feed and collant
2.Preload grinding parameter,Automatically compete coarse grinding, precision grinding and polish grinding. No need grinding experience.
3.Touch screen system, easy to operate,Multi-Language support
4.Basic type tooling A.B station sharpen punch only after removing guide.
5.Fixed clamp fixture, High precision on grinding surface
Auto tooling grinder parameter
| Specification(Auto punch die grinder) V8 | |
| Voltage | AC380V,50HZ |
| Power of main motor | 2.2KW,2840RPM |
| Motor of rotating table | 0.1KW,1440RPM |
| Servo motor | 0.75KW |
| Cooling motor | 0.045KW |
| Max.Grinding diameter | 200mm |
| Diameter of wheel(exhcange with Togu 3) | 150mm |
| Measure of Machine(LXWXH) | 820x810x1810mm |
Customer satisfied with auto tooling grinder 100%. More than 350 machines supply to sharpen all over countries.
